Phares d’iroise

Marc et Jean-Yves ont réaliser des modélisations de phares :
Le four, le Stiff, le Créach, la Jument et Kermorvan sont réalisés.
Ces modélisations 3D doivent clignoter selon leur signature lumineuse,
par ex le Four possède 5 éclats toutes les 15s.

Ainsi, conformément à notre devise, CONCEVOIR – MODÉLISER – FABRIQUER
voici les différentes étapes de ce projet en images :

//Programme clignotements led en fonction de la valeur analogique
//d'un pont diviseur. © Fablab Iroise

#include "tinysnore.h" // Include TinySnore Library

#define pinLed 0
#define RPin A1

int RValue = 0;

void setup() {
  // put your setup code here, to run once:

  pinMode(pinLed, OUTPUT);
  RValue = analogRead(RPin);


}
void loop() {

  if (RValue < 100) { // Four 5 eclats /15s

    digitalWrite(pinLed, HIGH);   // turn the LED on (HIGH is the voltage level)
    snore(250);                       // wait for a half second
    digitalWrite(pinLed, LOW);    // turn the LED off by making the voltage LOW
    snore(1000);//delay(2000);
        digitalWrite(pinLed, HIGH);   // turn the LED on (HIGH is the voltage level)
    snore(250);                       // wait for a half second
    digitalWrite(pinLed, LOW);    // turn the LED off by making the voltage LOW
    snore(1000);//delay(2000);
        digitalWrite(pinLed, HIGH);   // turn the LED on (HIGH is the voltage level)
    snore(250);                       // wait for a half second
    digitalWrite(pinLed, LOW);    // turn the LED off by making the voltage LOW
    snore(1000);//delay(2000);
        digitalWrite(pinLed, HIGH);   // turn the LED on (HIGH is the voltage level)
    snore(250);                       // wait for a half second
    digitalWrite(pinLed, LOW);    // turn the LED off by making the voltage LOW
    snore(1000);//delay(2000);
        digitalWrite(pinLed, HIGH);   // turn the LED on (HIGH is the voltage level)
    snore(250);                       // wait for a half second
    digitalWrite(pinLed, LOW);    // turn the LED off by making the voltage LOW
    snore(10000);//delay(2000);
  }
  if (RValue > 100 && RValue < 200) { // St-Mathieu 1 eclats /15s
         digitalWrite(pinLed, HIGH);   // turn the LED on (HIGH is the voltage level)
    snore(250);                       // wait for a half second
    digitalWrite(pinLed, LOW);    // turn the LED off by making the voltage LOW
    snore(14500);//delay(2000);
  }
   if (RValue > 200 && RValue < 300) { // Ile Vierge/Kermorvan 1 eclats /5s Pierres noire idem Rouge
         digitalWrite(pinLed, HIGH);   // turn the LED on (HIGH is the voltage level)
    snore(250);                       // wait for a half second
    digitalWrite(pinLed, LOW);    // turn the LED off by making the voltage LOW
    snore(4500);//delay(2000);
  }
   if (RValue > 300 && RValue < 400) { // Le Créach 2 eclats /10s Pierres noire idem Rouge
          digitalWrite(pinLed, HIGH);   // turn the LED on (HIGH is the voltage level)
    snore(250);                       // wait for a half second
    digitalWrite(pinLed, LOW);    // turn the LED off by making the voltage LOW
    snore(1000);//delay(2000);
         digitalWrite(pinLed, HIGH);   // turn the LED on (HIGH is the voltage level)
    snore(250);                       // wait for a half second
    digitalWrite(pinLed, LOW);    // turn the LED off by making the voltage LOW
    snore(8500);//delay(2000);
  }
  if (RValue > 500 && RValue < 600) { // Le Stiff 2 eclats /20s  Rouge
          digitalWrite(pinLed, HIGH);   // turn the LED on (HIGH is the voltage level)
    snore(250);                       // wait for a half second
    digitalWrite(pinLed, LOW);    // turn the LED off by making the voltage LOW
    snore(1000);//delay(2000);
         digitalWrite(pinLed, HIGH);   // turn the LED on (HIGH is the voltage level)
    snore(250);                       // wait for a half second
    digitalWrite(pinLed, LOW);    // turn the LED off by making the voltage LOW
    snore(18500);//delay(2000);
  }
   if (RValue > 700 && RValue < 800) { // Nividic 9 scintillements /10s  Blanc
          digitalWrite(pinLed, HIGH);   // turn the LED on (HIGH is the voltage level)
    snore(250);                       // wait for a half second
    digitalWrite(pinLed, LOW);    // turn the LED off by making the voltage LOW
    snore(250);//delay(2000);
           digitalWrite(pinLed, HIGH);   // turn the LED on (HIGH is the voltage level)
    snore(250);                       // wait for a half second
    digitalWrite(pinLed, LOW);    // turn the LED off by making the voltage LOW
    snore(250);//delay(2000);
           digitalWrite(pinLed, HIGH);   // turn the LED on (HIGH is the voltage level)
    snore(250);                       // wait for a half second
    digitalWrite(pinLed, LOW);    // turn the LED off by making the voltage LOW
    snore(250);//delay(2000);
           digitalWrite(pinLed, HIGH);   // turn the LED on (HIGH is the voltage level)
    snore(250);                       // wait for a half second
    digitalWrite(pinLed, LOW);    // turn the LED off by making the voltage LOW
    snore(250);//delay(2000);
           digitalWrite(pinLed, HIGH);   // turn the LED on (HIGH is the voltage level)
    snore(250);                       // wait for a half second
    digitalWrite(pinLed, LOW);    // turn the LED off by making the voltage LOW
    snore(250);//delay(2000);
           digitalWrite(pinLed, HIGH);   // turn the LED on (HIGH is the voltage level)
    snore(250);                       // wait for a half second
    digitalWrite(pinLed, LOW);    // turn the LED off by making the voltage LOW
    snore(250);//delay(2000);
           digitalWrite(pinLed, HIGH);   // turn the LED on (HIGH is the voltage level)
    snore(250);                       // wait for a half second
    digitalWrite(pinLed, LOW);    // turn the LED off by making the voltage LOW
    snore(250);//delay(2000);
           digitalWrite(pinLed, HIGH);   // turn the LED on (HIGH is the voltage level)
    snore(250);                       // wait for a half second
    digitalWrite(pinLed, LOW);    // turn the LED off by making the voltage LOW
    snore(250);//delay(2000);
         digitalWrite(pinLed, HIGH);   // turn the LED on (HIGH is the voltage level)
    snore(250);                       // wait for a half second
    digitalWrite(pinLed, LOW);    // turn the LED off by making the voltage LOW
    snore(5000);//delay(2000);
  }
  if (RValue > 800 && RValue < 900) { // La Jument 3 eclats /15s  Blanc
          digitalWrite(pinLed, HIGH);   // turn the LED on (HIGH is the voltage level)
    snore(250);                       // wait for a half second
    digitalWrite(pinLed, LOW);    // turn the LED off by making the voltage LOW
    snore(1000);//delay(2000);
    digitalWrite(pinLed, HIGH);   // turn the LED on (HIGH is the voltage level)
    snore(250);                       // wait for a half second
    digitalWrite(pinLed, LOW);    // turn the LED off by making the voltage LOW
    snore(1000);//delay(2000);
         digitalWrite(pinLed, HIGH);   // turn the LED on (HIGH is the voltage level)
    snore(250);                       // wait for a half second
    digitalWrite(pinLed, LOW);    // turn the LED off by making the voltage LOW
    snore(12
    500);//delay(2000);
  }
}